Alinco DJ-X11 - Manual (Page 62)

62
8. Functions Assigned to the Key Pad
8
8-11 Copying the Memory Channel Data into VFO Mode
You can copy the frequency of a memory channel into VFO mode. This function
is useful when you want to receive a frequency slightly different from that of a
memory channel or when you edit a memory channel.
1 In Memory mode, select a memory channel to copy its
data into VFO mode.
2 Press the [FUNC] key to display on the LCD.
3
Press the key; the frequency of the memory channel
is copied into VFO mode.
When the copy is complete, the mode changes to VFO mode.
8-12 F Tuning Function
This function allows reception of unknown radio signals by detecting a strong
radio signal and quickly tuning to its frequency. The F Tuning function can be
used in two modes: F COUNT (Frequency counter) and F TUNE (Strong signal-
priority tuning).
• In F COUNT mode, when an extremely strong signal is detected among the
received signals, its frequency is displayed in real time.
• In F TUNE mode, priority is given to detecting an extremely strong signal
among the received signals. A normal scan is then performed around the
frequency of the signal to catch the target signal more quickly and accurately.
● Setting the F Tuning function
1 Press the [FUNC] key to display on the LCD.
F COUNT
2
Press the key several times
to select “F COUNT” or “F TUNE”.
3 When “F TUNE” is selected, the
receiver automatically changes
to VFO mode when it detects a
frequency, allowing you to hear
the sound.
4 Press the [FUNC] key to fi nish the setting.
CAUTION
• The operating frequency for F COUNT and F TUNE is within the range
of 50 MHz to 1299.99995 MHz.
• This function may not work depending on the frequency condition,
such as when there are radio signals or noise stronger than the target
radio signal.
• The resolution of F COUNT is 5 kHz.
• The sensitivity may vary depending on the frequency.