Alinco DJ-X11 - Manual (Page 14)

14
3. Attaching Accessories
3
3.
Attaching Accessories
3-1 Antenna
3-1-1 Attaching the antenna
1 Hold the antenna at its base and rotate it clockwise (to
the right).
2 When you cannot rotate the
antenna further, confirm that
it is securely attached to the
receiver.
MEMO
• To avoid breakage, the supplied antenna is made of a more fl exible
material than that of typical antennae.
• This connector is also used for the connection of an external antenna.
3-1-2 Removing the antenna
1 Rotate the antenna counterclockwise (to the left).
3-2 Hand Strap
Hand strap 1 Attach the hand strap to the
hole on the rear of the receiver
as shown in the fi gure.