Alinco DJ-X11 - Manual (Page 17)

3. Attaching Accessories
17
3
3-5 Charging the Battery Pack through the DC Jack
The supplied lithium ion battery pack can be charged through the DJ-X11 by us-
ing the supplied AC adapter and a DC power supply (6 VDC, 1 A or more: IEC/
EN60950 standard). It takes about six hours to fully charge the battery pack
from a state of complete discharge.
1 Attach the battery pack by referring to “Battery Pack” (P. 15).
AC adapter
plug
AC adapter* 2 Connect the plug of the AC
adapter into the DC jack of the
DJ-X11 and plug the AC adapter
into a wall outlet.
* Your AC adapter may have a different
shape from the AC adapter shown in
the fi gure.
For the battery level indication during charging, refer to “Battery Level Icons” (P. 20).
CAUTION
• When the receiver is used with the supplied AC adapter connected, the
reception may be affected by noise; however, this is not a malfunction.
MEMO
• Also read the precautions supplied with the optional accessories care-
fully to ensure proper use and safety.
• If the voltage of the wall outlet is not stable, the battery pack may not
be charged properly.