Alinco DJ-X11 - Manual (Page 49)

8
8. Functions Assigned to the Key Pad
49
● Adjusting the receiving sensitivity
1 Press the [FUNC] key to display on the LCD.
145.000
F M
VFO
B S
Main band gain
1
2 Press the key to display
“Main band gain” (for the main
band) on the LCD. Pressing the
key again displays “Sub
band gain” (for the sub band).
3 Rotate the upper dial to adjust the sensitivity in 10 lev-
els from “1” to “10”.
The receiving sensitivity of this function can be set between "1" (highest)
and "10" (lowest).
● Setting the Attenuator function
145.000
F M
VFO
B S
Attenuator
OFF
1 Press the [FUNC] key to display
on the LCD.
2 Press the key to display “At-
tenuator” on the LCD.
3 Rotate the upper dial to adjust the setting in three levels
of “OFF”, “Low”, and “High”.
When "Low" or "High" is selected, "ATL" or "ATH" illuminates respectively.
CAUTION
• The attenuation level of the Attenuator function varies depending on
the received frequency.
• The receiving sensitivity adjustment of the DJ-X11 cannot “increase
the sensitivity” such as when using a preamplifi er.