Alinco DJ-X11 - Manual (Page 65)

9
9. Useful Functions
65
9-4 Preset Scan
1 Press the key to switch to Preset mode.
2
Press the key to select the band.
1 87.600
433.000
W F M
F M
B S
FM
VFO
3
Press the k e y t o s t a r t
scanning.
During scanning, the decimal point of the
displayed frequency fl ashes.
4 Press the [FUNC] or key to stop scanning.
9-5 Memory scan
In Memory mode, either a specifi ed bank or all banks are scanned. The memory
scan offers the following three types of scanning methods.
Single bank scan This scans only through a specifi ed bank.
Group scan This scans only a group of previously selected
banks.
All-bank scan This scans all available banks which are
previously programmed.
MEMO
• Banks other than those for normal memory channels cannot be
scanned.
• By using the utility software to expand the bank, the all-bank scan can
be expanded to scan between banks 0 and 49.
• The group scan cannot be used unless the Bank Link setting (P. 54) is
completed.
1
Press the key to switch to Memory mode.
145.000
B S
0 0 2
0 1 1
MR
Single bank scan
2 Hold down the key and ro-
tate the upper dial to select the
scan type.
The following types are available for the
memory scan.
• Single bank scan
• Group scan
• All-bank scan
When the single-bank scan is selected, the current bank will be scanned.
3 Release the key to start scanning.
During scanning, the decimal point of the displayed frequency fl ashes.
4 Press the [FUNC] or key to stop scanning.