Alinco DJ-X11 - Manual (Page 81)

10
10. Set Mode Confi gurations
81
10-3 Power and Battery Setting
Use this menu to set power-related options.
145.000
F M
VFO
B S
<
POWER & BATT.
>
1 Select from
the Set mode menu.
2
Press the
SET
CLR
key to display the
sub menu.
10-3-1 Auto power off setting
“Auto Power Off” is abbreviated to APO. Use this function to make a beep-
ing sound and turn off the power automatically when the receiver is not
operated for the specifi ed period of time.
145.000
F M
VFO
B S
Auto Power Off
OFF
1 Rotate the upper dial to select
“Auto Power Off”.
The LCD displays the information as
shown on the right.
2 Rotate the lower dial to select the period of no operation
before the power is turned off automatically.
Rotating the dial switches the options as follows:
30min 1hour 2hrs 3hrs 5hrs 8hrs OFF
To turn on the receiver which was turned off by the APO function, hold
down the POWER key.
MEMO
• The APO time is not extended while the receiver is only receiving
signals. When any key is operated, the counter is reset and the timer
restarts.
• When the APO is set and the receiver is not operated for the speci-
fi ed period of time, it is turned off even if the scan operation or Priority
Monitoring function is active.