Alinco DJ-X11 - Manual (Page 39)

7
7. Memory Mode
39
CAUTION
• Once data is deleted, it cannot be restored. Ensure that you do not de-
lete necessary data by mistake.
• To prevent important data from being deleted accidentally, be sure to
reactivate the “Write-protect (memory protection) function” (P. 91) after
deleting data. When you set the Write-protect function to “fail-safe”,
the setting will be automatically reset to “Accepted” after the receiver is
turned OFF and then turned ON again.
7-5 Editing a Memory Channel
The data in a memory channel can be moved to a memory channel in another
bank.
1 Press the key to switch to Memory mode.
2 Select the memory channel to move data.
3 Press the [FUNC] key.
4 Press the key.
5 Rotate the dial to select the destination bank and mem-
ory channel.
When you select a memory channel which has already been programmed
with data, "MR" is displayed on the LCD.
6
Press the key.
Pressing the [FUNC] key cancels the operation.
MEMO
• To overwrite and program a memory channel, you need to set the
“Write-protect (memory protection) function” (P. 91) to “Prohibited” or
“fail-safe” in advance.