Sundance SMT712 - Manual (Page 88)

User Manual SMT712 Page 88 of 89 Last Edited: 11/12/2012 10:36:00
8 Safety
This module presents no hazard to the user when in normal use.
9 EMC
This module is designed to operate from within an enclosed host system, which is
build to provide EMC shielding. Operation within the EU EMC guidelines is not
guaranteed unless it is installed within an adequate host system.
This module is protected from damage by fast voltage transients originating from
outside the host system which may be introduced through the output cables.
Short circuiting any output to ground does not cause the host PC system to lock up
or reboot.
10 Ordering Information
Three variations of this product are available:
1 – SMT712 with an XC5VLX110T-3 (fastest speed grade available) FPGA and works
as a PXI Express Peripheral Module. The part number for this option is SMT712.
Requires a PXI Express chassis such as the NI-1062Q from National Instrument.
2 – SMT712 with an XC5VLX110T-3 (fastest speed grade available) FPGA and works
as a PXI Express Hybrid Peripheral Module (PXI P1 connector). The part number for
this option is SMT712-HYBRPXI32. Requires a PXI Express chassis such as the NI-
1062Q from National Instrument.
3 - SMT712 with an XC5VLX110T-3 (fastest speed grade available) FPGA and works
as a Compact PCI Module. The part number for this option is SMT712-CPCI32.
Requires a Compact PCI rack. Note that it can also be plugged into a PXI Express
chassis such as the NI-1062Q from National Instrument.
4 - SMT712 with an XC5VLX110T-3 (fastest speed grade available) FPGA and works
in standalone. It can be fitted in a PCI slot (Can be PCI-32 or 64 or PCI-X on a PC
motherboard) without being electrically connected to it. This option requires an
external power cable and a connection to an other piece of hardware from Sundance
via SHB or RSL or SATA (optional). The part number for this option is SMT712-
STANDALONE. Note that the Standalone version of the SMT712 does not have any
dual SATA connector.
5 – SMT712 with an XC5VFX70T-3 (fastest speed grade available) FPGA and works as
a PXI Express Peripheral Module. The part number for this option is SMT712-
FX70T. Requires a PXI Express chassis such as the NI-1062Q from National
Instrument.
6 – SMT712 with an XC5VFX70T-3 (fastest speed grade available) FPGA and works as
a PXI Express Hybrid Peripheral Module (PXI P1 connector). The part number for this
option is SMT712-HYBRPXI32-FX70T. Requires a PXI Express chassis such as the
NI-1062Q from National Instrument.