Sundance SMT712 - Manual (Page 87)

User Manual SMT712 Page 87 of 89 Last Edited: 11/12/2012 10:36:00
Parameters to configure the clock distribution chip, DCM phase shifts can be loaded
(Hardware selection section - example files are provided in \\Program
Files\Sundance\SMT7026\Host\Smt712Config\Custom_Parameters)
from a
configuration file, as well as the clock and reference source. A pattern can be loaded
from the application itself (sinewave) or from text files (file DDR2 pattern generator
section)..
In order to have the software source code for the SMT7002, the SMT7026 package
will have to be purchased. They come as a visual C++ project with all necessary files
to recompile the application and modify it.
7 Physical Properties
Dimensions PXI Express 3U
SMT712
(LX110T)
Board Booted
DACs
OFF
Clock OFF
SHBs OFF
Board Booted
DACs
ON
Clock ON
SHBs OFF
DDR2 pattern ON
Board Booted
ADCs
ON
Clock ON
SHBs ON
DDS ON
Weight 284 grams
Supply Currents +12V Tbd Tbd Tbd
+3.3V Tbd Tbd Tbd
MTBF
Dimensions PXI Express 3U
SMT712-FX70T
Board Booted
DACs
OFF
Clock OFF
SHBs OFF
Board Booted
DACs
ON
Clock ON
SHBs OFF
DDR2 pattern
ON
Board Booted
ADCs
ON
Clock ON
SHBs ON
DDS ON
Weight 284 grams
Supply Currents +12V 0.87 amp. 1.59 amps. 1.25 amps.
+3.3V 2.74 amps. 4.27 amps. 4.24 amps.
Total power 19.48 Watts 33.17 Watts 28.99 Watts
MTBF
The SMT7002 GUI has been used to configure the boards from which currents
consumed were measured. Boards were setup as follows, internal clock locked on
external 10-MHz reference, ADCs clocked at 3GSPS and set in Test mode, continuous
acquisitions (DMAs).