Sundance SMT712 - Manual (Page 53)

User Manual SMT712 Page 53 of 89 Last Edited: 11/12/2012 10:36:00
0 ‘000’ 200
4.6.1.1.28 Clock Generator (AD9516-2) Register 0xA5 – OUT7 Delay
Fraction – 0x11C (write).
Clock Generator (AD9516-2) Register 0xA5 – OUT7 Delay Fraction – 0x11C (write)
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Reserved Reserved OUT7 Delay Fraction
Default ‘0’ ‘0’ ‘000000’
Clock Generator (AD9516-2) Register 0xA5 – OUT7 Delay Fraction – 0x11C (write)
Setting Bit 5..0 Description (OUT7 Delay Fraction)
0 "000000" gives zero delay. Only delay values up to 47 decimals (101111b; 0x2F) are
supported.
4.6.1.1.29 Clock Generator (AD9516-2) Register 0xA6 – OUT8 Delay
Bypass – 0x120 (write).
Clock Generator (AD9516-2) Register 0xA6 – Out8 Delay Bypass – 0x120 (write)
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0
Reserved
OUT8
Delay
Bypass
Default ‘0000000’ ‘1’
Clock Generator (AD9516-2) Register 0xA6 – Out8 Delay Bypass – 0x120 (write)
Setting Bit 0 Description (OUT8 Delay Bypass)
0 0 use delay function.
1 1 bypass delay function.
4.6.1.1.30 Clock Generator (AD9516-2) Register 0xA7 – OUT8 Delay
Full-scale – 0x124 (write).
Clock Generator (AD9516-2) Register 0xA7 – OUT8 Delay Full-scale – 0x124 (write)
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Reserved Reserved OUT8 Ramp Capacitors OUT8 Ramp Current
Default ‘0’ ‘0’ ‘000’ ‘000’
Clock Generator (AD9516-2) Register 0xA7 – OUT8 Delay Full-scale – 0x124 (write)
Setting Bit 5..3 Description (OUT8 Ramp Capacitors)
7 ‘111’ 1
6 ‘110’ 2
5 ‘101’ 2
4 ‘100’ 3