Artesyn ATCA-8330 Installation and Use (April 2015) - Manual (Page 33)

Chapter 1
ATCA-8330 Installation and Use (6806800S82B) 33
Introduction
1.1 Features
The ATCA-8330 is a high-performance ATCA compliant single board computer designed for
demanding storage and processing applications.
The main features of the ATCA-8330 board are as follows:
 Designed for NEBS level 3
 Single socket Intel Xeon E5-2600 V2
 Standard configuration ATCA-8330:
– Intel Xeon E5-2648 V2 10-core 70W 1.9GHz
– DDR3 memory support up to 1866MHz
– LVDDR3 (1.35V) support up to 1600MHz for better thermal performance and reduced
power consumption
– Four independent DDR3 memory channel per CPU with one DIMM slot per channel (1
DPC) resulting in a total of 4 DIMM slots
– 4GB and 8GB DDR3 modules as VLP-MINI DIMMS available
 Single slot ATCA form factor (280mm x 322mm)
 Direct CPU to PCIe interface providing 40 PCIe Gen3 lanes (8 Gbps)
 Next Generation Communications Platform from Intel, codename Crystal Forest with on-
board DH8900CC (SKU4) Platform controller I/O Hub (PCH)
 Intel Quickassist Technology support for advanced Datapacket processing on onboard
PCH and on ACC-module
 Dual Gb Ethernet AdvancedTCA Base Interfaces according to PICMG 3.0
 Dual 10GBASE-KX4,1000Base-KX: Option1, 1-K,1-KR,9,9-K,9-KR Ethernet AdvancedTCA
Fabric Interfaces according to PICMG 3.1
 Single GbE port on Faceplate
 Serial over LAN via AdvancedTCA base Interface
 CPU and I/O virtualization support
 Power management support
 Crisis recovery for BIOS, IPMC Firmware, and FPGA code