Artesyn ATCA-8330 Installation and Use (April 2015) - Manual (Page 118)

Functional Description
ATCA-8330 Installation and Use (6806800S82B) 118
5.8 MO297 SlimSATA Embedded Solid State Disc
(SSD)
The board provides a slot for an embedded flash based SATA-SSD solution. The Sata interface
is compliant to SATA 3Gb/s speed.
5.9 BIOS
ATCA-8330 provides a BIOS firmware that is stored in flash memory. It can be updated
remotely via Ethernet or locally via Operating System. Along with the BIOS and BIOS Setup
program, the flash memory contains POST and Plug and Play support.
The BIOS displays a message during POST identifying the type of BIOS and a revision code. A
BIOS extension is provided for the RTM based SAS controller to support RAID configuration.
5.10 IPMC
The Blade features an Intelligent Platform Management Controller (IPMC) compliant to PICMG
3.0 and IPMI 1.5 and 2.0 (SOL only). The IPMC is a management subsystem provides
monitoring, event logging, and recovery control features. The IPMC serves as the gateway for
management applications to access the payload hardware. The IPMC firmware is stored in two
independent memory images. Crisis recovery control is provided to allow reboot of the IPMC
from a second image if the upgraded firmware image is corrupted. Firmware images can be
upgraded via HPM.1/IPMI using either IPMB or KCS (Keyboard Controller Style) interface.
Table 5-5 Ethernet Controller Types
Interface Location Controller Phy PCIe Root complex Count Ethernet type
Base Interface P23 Intel I350 integrated
in I350
(x4PCIe Gen2) 2 10/100/1000Base-T
Fabric
Interface
P23 Intel I82599 NA CPU#0 -> (x8 PCIe Gen2) 2 10GBASE-KX4,1000Base-KX:
Option1, 9
Faceplate
P70 Intel I350 88E1322 (x4PCIe Gen2) 1 10/100/1000Base-T