3 set feature configuration command, Table 9-22, Set feature configuration command – Artesyn ATCA-8330 Installation and Use (April 2015) User Manual
Page 202: Supported ipmi commands
Supported IPMI Commands
ATCA-8330 Installation and Use (6806800S82B)
202
9.3.3
Set Feature Configuration Command
This command can be used to enable/disable features configurations within the IPMC during
runtime.
Table 9-22 Set Feature Configuration Command
Byte
Data Field
Request Data
1
LSB of Artesyn IANA Enterprise Number. A value of CDh shall be used.
2
2nd byte of Artesyn IANA Enterprise Number. A value of 65h shall be
used.
3
MSB of Artesyn IANA Enterprise Number. A value of 00h shall be used.
4
Feature Selector. For details, please see table 3
5
Feature Configuration.
00h = disabled (Feature Selector = E0)
01h = enabled (Feature Selector = E0)
02h - FFh = reserved
6
Persistency / Duration
00h = volatile. Actual duration depends on implementation.
01h - FFh = reserved
Response Data
1
Completion Code. Generic plus the following command-specific
completion codes:
80h = feature selector not supported.
81h = feature configuration not supported
83h = configuration persistency / duration not supported
2
LSB of Artesyn IANA Enterprise Number. A value of CDh shall be used.
3
2nd byte of Artesyn IANA Enterprise Number. A value of 65h shall be
used.
4
MSB of Artesyn IANA Enterprise Number. A value of 00h shall be used.