Artesyn ATCA-8330 Installation and Use (April 2015) - Manual (Page 120)

Functional Description
ATCA-8330 Installation and Use (6806800S82B) 120
5.11 Serial Redirection
The CPU serial redirection reroutes the console input and output; that is the text output to the
text screen and input from the standard keyboard. The console typically is used by the BIOS
setup menus, BIOS initialization and boot routines, OS boot loaders, and loaded OSs.
The serial console of the payload CPU is available via SOL. In addition to the SOL capability, the
serial console is also available on the blade faceplate using an RJ45 connector with Cisco pin-
out.
If an SOL session is established, only the output is available on the faceplate. Input is not
possible during this time via the faceplate. Alternative to the CPU serial console, the IPMC serial
console is also available on the faceplate serial connector. It can be selected via specific IPMI
OEM command.
Table 5-7 ATCA-8330 H8S I2C Bus #1
Device Type Device Name Bus Controller Address
Temp Sensor at IPMC LM75 I2C Bus #1 IPMC H8S 0x90
Clock Generator CK420B I2C Bus #1 IPMC H8S 0xD2
DB1900Z Clock DB1900Z I2C Bus #1 IPMC H8S 0xD8
Intel Cavecreek PCK Slave
SMBus IF Intel Cavecreek
PCH/IPMC I2C Bus #1 IPMC H8S 0xE0 (IOH Bootstrap
SMBusID Option is 0xC0)
0xA4
MAX6618 PECI HUB AMX6618 I2C Bus #1 IPMC H8S 0x54
SPD on DIMM 0 DDR3 SPD I2C Bus #1 IPMC H8S 0xA6/0x36
SPD on DIMM 1 DDR3 SPD I2C Bus #1 IPMC H8S 0xA8/0x38
SPD on DIMM 2 DDR3 SPD I2C Bus #1 IPMC H8S 0xAA/0x3A
SPD on DIMM 3 DDR3 SPD I2C Bus #1 IPMC H8S 0xAC/0x3C
SPD on DIMM 4 DDR3 SPD I2C Bus #1 IPMC H8S 0xAE/0x3E