beautypg.com

1 set serial output command, Table 9-20, Set serial output command – Artesyn ATCA-8330 Installation and Use (April 2015) User Manual

Page 200: Supported ipmi commands

background image

Supported IPMI Commands

ATCA-8330 Installation and Use (6806800S82B)

200

9.3.1

Set Serial Output Command

This command allows you to set the serial output source for a particular serial port connector.

Table 9-20 Set Serial Output Command

Byte

Data Field

Request Data

1

LSB of Artesyn IANA Enterprise Number. A value of CDh shall be
used.

2

2nd byte of Artesyn IANA Enterprise Number. A value of 65h shall be
used.

3

MSB of Artesyn IANA Enterprise Number. A value of 00h shall be
used.

4

Serial connector type:
0 = Front panel connector
1 = Backplane panel connector
All other values are reserved.

5

Serial connector instance number. A sequential number starts from
zero.

6

Serial output selector:
0 = BIOS
2 = IPMC debug console
All other values are reserved.

Response Data

1

Completion Code

2

LSB of Artesyn IANA Enterprise Number. A value of CDh shall be
used.

3

2nd byte of Artesyn IANA Enterprise Number. A value of 65h shall be
used.

4

MSB of Artesyn IANA Enterprise Number. A value of 00h shall be
used.