Artesyn ATCA-8330 Installation and Use (April 2015) - Manual (Page 225)

Chapter 10
ATCA-8330 Installation and Use (6806800S82B) 225
FRU Information and Sensor Data Records
10.1 FRU Information
The ATCA-8330 implements one intelligent FRU and up to 10 non-intelligent FRUs presenting
the presence of a DSP DIMM Module.
Every FRU provides its own FRU information (serial, part, MAC addresses). Depending on the
presence of a module, its FRU information is visible or not. The FRU information structure is
specified in the following table:
Table 10-1 FRU Information
Area Description Value Access
Internal use area Not used
Board info area Mfg date / time According to Platform Management FRU
information Storage Definition v1.0 r
Board manufacturer 'EMERSON' r
Board product name Product name of the specific blade variant r
Board serial number Defined by Artesyn Embedded
Technologies r
Board part number Defined by Artesyn Embedded
Technologies r
Product info area Product
manufacturer 'EMERSON' r
Product name Product name of the specific blade variant r
Product serial number Defined by Artesyn Embedded
Technologies
r
Product part number Defined by Artesyn Embedded
Technologies r
Multi record info
area Blade Point-To-Point
Connectivity Record
Area This multi record area contains the ATCA-
blade Point to Point Connectivity Record
according to PICMG 3.0, Rev.1.0. The
contents are described in the section 'E-
Keying'. r
Custom usage Min. 256 Byte available r/w