Artesyn ATCA-7368 Installation and Use (June 2014) - Manual (Page 79)

BIOS
ATCA-7368 Installation and Use (6806800M12D) 79
Progress Codes
0x1 Power on. Reset type detection (soft/hard).
0x2 AP initialization before microcode loading
0x3 North Bridge initialization before microcode loading
0x4 South Bridge initialization before microcode loading
0x5 OEM initialization before microcode loading
0x6 Microcode loading
0x7 AP initialization after microcode loading
0x8 North Bridge initialization after microcode loading
0x9 South Bridge initialization after microcode loading
0xA OEM initialization after microcode loading
0xB Cache initialization
SEC Error Codes
0xC – 0xD Reserved for future AMI SEC error codes
0xE Microcode not found
0xF Microcode not loaded
Table 4-6 PEI Status Codes
Status Code Description
Progress Codes
0x10 PEI Core is started
0x15 Pre-memory North Bridge initialization is started
0x19 Pre-memory South Bridge initialization is started
0x2F Memory initialization (other)
0x31 Memory Installed
0x32 CPU post-memory initialization is started
0x33 CPU post-memory initialization. Cache initialization
Table 4-5 SEC Status Codes (continued)
Status Code Description