Artesyn ATCA-7368 Installation and Use (June 2014) - Manual (Page 32)

Introduction
ATCA-7368 Installation and Use (6806800M12D) 32
– 1x SATA port
– 1x UART and 1x USB interfaces
– IPMI Management bus
 One AMC slot
– PCI-E2.0 x4 on ports 4-7
– FCLK support
 Front Panel
– Two 10/100/1000BASE-T Ethernet
– Two USB2.0 Ports
– One serial console
 BIOS Chip: Up to 4 MB onboard Boot and 4 MB Recovery Boot Flash (SPI)
 Onboard storage support (optional)
– SATA Cube (SSD): 16, 32, 64, 128 GB capacity
– USB flash (EUSB SDD), 1, 2 or 4 GB capacity
 Onboard IPMC (IPMI management controller) implements IPMI version 1.5
 Onboard Glue Logic FPGA for IPMC extension and onboard Control register
1.2 Standard Compliances
The product is designed to meet the following standards.
Table 1-1 Standard Compliances
Standard Description
SN29500/8, Reliability requirements
MIL-HDBK-217F,
GR-332,
TR-NWT-000357