Artesyn ATCA-7368 Installation and Use (June 2014) - Manual (Page 210)

FRU Information and SDR Summary
ATCA-7368 Installation and Use (6806800M12D) 210
0x1C BMC Watchdog Watchdog 2
0x23
Sensor-specific
discrete
0x6F [7:4] = (See IPMC Spec)
[3:0] = Offset (0, 1, 2, 3 or
8)
See IPMI Spec 0xFF 0x0: Timer expired
0x1: Hard Reset
0x2: Power Down
0x3: Power Cycle
0x8: Timer Interrupt Asrt Auto
0x1D IPMC POST Management
Subsystem
Health
0x28 discrete
0x6 [7:4] = See IPMC Spec
[3:0] = Offset (0, 1) 0xFF 0xFF 0x0: Performance Met
0x1: Performance Lags Asrt Auto
0x1E Version Change Version
Change
0x2B
Sensor-specific
discrete
0x6F [7:4] = (See IPMC Spec)
[3:0] = Offset (0, 1, 2, 3, 4,
5, 6, 7)
Change Type.
(See IPMC Spec) 0xFF 0x0: Hardware change
0x1: Firmware or software
change
0x2: Hardware
incompatibility
0x3: Firmware or software
incompatibility
0x4: Entity is of an invalid
hardware version
0x5: Entity contains
invalid
F/W,software
0x6: Hardware Change
successful
0x7: Software or F/W
change successful
Asrt Auto
0x1F Fw Progress System
Firmware
Progress
0x0F Sensor-specific
discrete
0x6F [7:4] = (See IPMC Spec)
[3:0] = Offset (1) See IPMI Spec See IPMI Spec 0x0: System Firmware
Error
0x1: System Firmware
Hang
0x2: System Firmware
Progress Asrt Auto
Table 8-46 Sensor Data Records (continued)
Sensor
Number Sensor Name Sensor Type
Event/Reading
Type Event Data Byte 1 Event Data Byte 2 Event Data Byte 3
Event
Threshold/Description
Assertion
Deassertion Rearm
Asrt: Assertion Unr: Upper non-recoverable threshold Uc: Upper critical threshold Unc: Upper non-critical threshold
Deass: Deassertion Lnr: Lower non-recoverable threshold Lc: Lower critical threshold Lnc: Lower non-critical threshold