Artesyn ATCA-7368 Installation and Use (June 2014) - Manual (Page 104)

Supported IPMI Commands
ATCA-7368 Installation and Use (6806800M12D) 104
7.2.2 System Interface Commands
The watchdog commands are supported by blades providing a system interface and a
watchdog type 2 sensor, also supported a OEM timeout action which is warm reset(04h).
7.2.3 Watchdog Commands
The watchdog commands are supported by blades providing a system interface and a
watchdog type 2 sensor.
Table 7-2 Supported System Interface Commands
Command NetFn (Request/Response) CMD
Set BMC Global Enables 0x06/0x07 0x2E
Get BMC Global Enables 0x06/0x07 0x2F
Clear Message Flags 0x06/0x07 0x30
Get Message Flags 0x06/0x07 0x31
Get Message 0x06/0x07 0x33
Send Message 0x06/0x07 0x34
Set Channel Access 0x06/0x07 0x40
Get Channel Access 0x06/0x07 0x41
Get Channel Info 0x06/0x07 0x42
Set User Access 0x06/0x07 0x43
Get User Access 0x06/0x07 0x44
Set User Name 0x06/0x07 0x45
Get User Name 0x06/0x07 0x46
Set User Password 0x06/0x07 0x47
Set User Payload Access 0x06/0x07 0x4C
Get User Payload Access 0x06/0x07 0x4D
Set Channel Security Keys 0x06/0x07 0x5C