Artesyn ATCA-7368 Installation and Use (June 2014) - Manual (Page 78)

BIOS
ATCA-7368 Installation and Use (6806800M12D) 78
4.15 BIOS Status Codes
The following table lists the BIOS status codes applicable to the used AMI UEFI BIOS. The BIOS
status codes are stored in the blade's Port 80 register and can also be obtained by reading an
on-board IPMI sensor.
4.15.1 Status Code Ranges
4.15.2 Standard Status Codes
Table 4-4 Status Code Ranges
Status Code Range Description
0x01 – 0x0F SEC Status Codes & Errors
0x10 – 0x2F PEI execution up to and including memory detection
0x30 – 0x4F PEI execution after memory detection
0x50 – 0x5F PEI errors
0x60 – 0xCF DXE execution up to BDS
0xD0 – 0xDF DXE errors
0xE0 – 0xE8 S3 Resume (PEI)
0xE9 – 0xEF S3 Resume errors (PEI)
0xE8 - 0xEF Memory initialization errors
0xB0 - 0xBF Additional Memory Initialization Status Codes
0xE8 - 0xEE Additional Memory Error Status Codes
Table 4-5 SEC Status Codes
Status Code Description
0x0 Not used