Artesyn ATCA-7368 Installation and Use (June 2014) - Manual (Page 149)

FRU Information and SDR Summary
ATCA-7368 Installation and Use (6806800M12D) 149
8.4 Power Configuration
The following table lists the power configuration of ATCA-7368 blade.
Table 8-2 Contents of the Blade Point-to-Point Connectivity Record Area
No.
Link
Grouping ID Interface Channel
Number Ports Link
Type Link Type
Extension
1 0 0 (Base Interface) 1 0 -SET 1 - NOT SET 2 - NOT
SET 3 - NOT SET 0x01 0
2 0 0 (Base Interface) 2 0 -SET 1 - NOT SET 2 - NOT
SET 3 - NOT SET 0x01 1
3 0 1 (Fabric Interface) 1 0 -SET 1 - SET 2 -SET 3 -SET 0x02 1
4 0 1 (Fabric Interface) 1 0 -SET 1 - NOT SET 2 - NOT
SET 3 - NOT SET 0x02 0
5 0 1 (Fabric Interface) 2 0 -SET 1 - SET 2 -SET 3 -SET 0x02 1
6 0 1 (Fabric Interface) 2 0 -SET 1 - NOT SET 2 - NOT
SET 3 - NOT SET 0x02 0
Table 8-3 Power Configuration
Item Value Description
Dynamic power reconfiguration
support No While the blade is powered, it supports
only power level
Dynamic power configuration No The power level is fixed and does not
change
Number of power draw levels 1 The amount of possible power levels
Early Power Draw Levels, Watt - Complete early power level including
IPMC