Supported ipmi commands, 1 overview, 2 standard ipmi commands – Artesyn ATCA-7368 Installation and Use (June 2014) User Manual
Page 103: 1 global ipmi commands, 1 overview 7.2 standard ipmi commands, Table 7-1, Supported global ipmi commands, Chapter 7
Chapter 7
ATCA-7368 Installation and Use (6806800M12D)
103
Supported IPMI Commands
7.1
Overview
This chapter describes the IPMI Commands supported on ATCA-7368.
7.2
Standard IPMI Commands
The IPMC is fully compliant to the Intelligent Platform Management Interface v.1.5. This
section provides information about the supported IPMI commands.
7.2.1
Global IPMI Commands
The IPMC supports the following global IPMI commands.
Table 7-1 Supported Global IPMI Commands
Command
NetFn (Request/Response)
CMD
Comments
Get Device ID
0x06/0x07
0x01
-
Cold Reset
0x06/0x07
0x02
-
Warm Reset
0x06/0x07
0x03
-
Get Self Test Results
0x06/0x07
0x04
-
Get Device GUID
0x06/0x07
0x08
-
Master Write-Read
0x06/0x07
0x52
Only for accessing private I2C
buses.
This manual is related to the following products: