Artesyn ATCA-7368 Installation and Use (June 2014) - Manual (Page 76)

BIOS
ATCA-7368 Installation and Use (6806800M12D) 76
4.9 Board Information Display
The BIOS shall display the following Board related information in BIOS Setup under “Board
Info”:
 Current System (label for the loaded BIOS defaults set)
 BIOS Version
 BIOS Date
 IPMI Firmware Version
 FPGA Version (Onboard FPGA version)
 BIOS Source (boot flash device bank)
 CPU information
 CPLD information
 Board Serial Number stored in IPMI FRU data
4.10 USB Ports
The USB ports can be disabled by BIOS setup menu.
4.11 Supported Operating Systems
WRS PNE LE 4.x Linux, Red Hat Enterprise Linux 5.x will be supported. DOS will be used for
debugging.
Table 4-3 USB Ports
USB port BIOS setting Format/Options Default Value
Onboard USB FlashDisk Enabled/Disabled Enabled
Front Panel USB Enabled/Disabled Enabled
ARTM USB Enabled/Disabled Enabled