Artesyn ATCA-7368 Installation and Use (June 2014) - Manual (Page 117)

Supported IPMI Commands
ATCA-7368 Installation and Use (6806800M12D) 117
err_threshold numeric(1~1000) 10
err_log_limit numeric(1~20) 10
Config_iou1 44:48:84:88:16 44
Transf_timeout 1:5:10:20 20
powerup_delay auto:manual auto
flow_ctrl none:hwrc:swct none
erase_event_log no:next:every no
act_log_full nothing:erase nothing
Boot_order device1,devcice2,..device8
See
Table 7-16
Table 7-16 boot_order Devices
Device Description
sata0 SATA device 0 (Debug SATA)
sata1 SATA device 1 (RTM Debug SATA)
sata5 SATA device 5 (Onboard SATA)
sataonboard SATA device 5 (Onboard SATA)
sashdd SAS HDD mounted on the RTM
sas0_nn SAS Controller nn = SCSI ID
(use this when a SAS array is connected to the RTM)
frontnet Front Panel Network
basenet0 Base0 Network
basenet1 Base1 Network
usb1 USB frontpanel 1
usb2 USB frontpanel 2
usbonboard USB onboard HDD
usbartm USB artm
usbkey USB key
Table 7-15 System Boot Options Parameter #100 - Supported Parameters (continued)
Parameter Options Default Values