Artesyn ATCA-7368 Installation and Use (June 2014) - Manual (Page 23)

ATCA-7368 Installation and Use (6806800M12D) 23
About this Manual
Overview of Contents
This manual is intended for users qualified in electronics or electrical engineering. Users must
have a working understanding of Peripheral Component Interconnect (PCI), AdvancedTCA®,
and telecommunications.
The manual contains the following chapters and appendices:
 About this Manual on page 23 lists all conventions and abbreviations used in this manual
and outlines the revision history.
 Safety Notes on page 15 lists safety notes applicable to the blade.
 Sicherheitshinweise on page 19 provides the German translation of the safety notes section.
 Introduction on page 31 describes the main features of the blade.
 Hardware Preparation and Installation on page 41 outlines the installation requirements,
hardware accessories, switch settings, installation and removal procedures.
 Controls, Indicators, and Connectors on page 59 describes external interfaces of the blade.
This includes connectors and LEDs.
 BIOS on page 67 describes the features and setup of BIOS.
 Functional Description on page 85 describes the functional blocks of the blade in detail. This
includes a block diagram, description of the main components used and so on.
 Serial Over LAN on page 97 provides information on how to establish a serial-over LAN
session on your blade.
 Supported IPMI Commands on page 103 lists all supported IPMI commands.
 FRU Information and SDR Summary on page 147 provides information on the blade’s FRU
information and sensor data.
 Replacing the Battery on page 215 provides the procedures in changing the battery.
 Related Documentation on page 219 provides links to further blade-related
documentation.