Artesyn ATCA-7368 Installation and Use (June 2014) - Manual (Page 71)

BIOS
ATCA-7368 Installation and Use (6806800M12D) 71
Press when requested. The main menu appears. It looks similar to the one shown in the
following figure.
In order to navigate in setup, use the arrow keys on the keyboard to highlight items on the
menu. All other navigation possibilities are shown at the bottom of the menu.
Additionally, an item-specific help is displayed on the right side of the menu window.
4.4 Boot Options
This section describes which boot devices are supported by the BIOS and how to select the
boot device.
Figure 4-1 Main Menu
 Make sure that BIOS is properly configured prior to installing the operating system and
its drivers.
 If you save changes in setup, the next time the blade boots BIOS will configure the
system according to the setup selections stored. If those values cause the system boot
to fail, reboot and enter setup to get the default values or to change the selections that
caused the failure.