Artesyn ATCA-7368 Installation and Use (June 2014) User Manual
Page 48

Hardware Preparation and Installation
ATCA-7368 Installation and Use (6806800M12D)
48
Installation Procedure
To install a DIMM module, proceed as follows:
1. Remove blade from system as described in
Installing and Removing the Blade
2. Open locks of memory module socket.
3. Press module carefully into socket.
As soon as the memory module has been fully inserted, the locks automatically
close.
4. If applicable, repeat steps 2 to 3 to install further modules.
DIMM modules used within one channel must be based on the same memory technology.
For maximum memory performance all three channels of one CPU must be equipped with
an identical amount and size of DIMMs.
Damage of Circuits
Electrostatic discharge and incorrect module installation and removal can damage circuits
or shorten their life.
Before touching the module or electronic components, make sure that you are working in
an ESD-safe environment.
Damage of Circuits
Electrostatic discharge and incorrect module installation and removal can damage circuits
or shorten their life.
Before touching the module or electronic components, make sure that you are working in
an ESD-safe environment.