beautypg.com

11 set payload communication time-out command, Table 7-41, Ime-out – Artesyn ATCA-7368 Installation and Use (June 2014) User Manual

Page 138: Supported ipmi commands

background image

Supported IPMI Commands

ATCA-7368 Installation and Use (6806800M12D)

138

7.5.11 Set Payload Communication Time-Out Command

The Set Payload Communication Time-Out command sets the payload communication time-
out value.

2:4

PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 2 = 0A, byte 3 = 40, byte 4 = 00

5

Payload Time-out
Payload communication time-out measured in hundreds
of milliseconds. Thus, the payload communication time-
out may vary from 0.1 to 25.5 seconds.

Table 7-40 Get Payload Communication Time-Out Command Description (continued)

Type Byte

Data

Field

Table 7-41 Set Payload Communication Time-Out Command Description

Type Byte

Data

Field

Request Data

1:3

PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00

4

Payload Time-out
Payload communication time-out measured in hundreds
of milliseconds. Thus, the payload communication time-
out may vary from 0.1 to 25.5 seconds.

Response Data

1

Completion Code

2:4

PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 2 = 0A, byte 3 = 40, byte 4 = 00

This manual is related to the following products: