Artesyn ATCA-7368 Installation and Use (June 2014) - Manual (Page 150)

FRU Information and SDR Summary
ATCA-7368 Installation and Use (6806800M12D) 150
8.5 Sensor Data Records
The following table lists the sensors available on the blades.
Steady state power draw Levels, watt Power Level 1: ATCA7368-
0GB: 160W
ATCA7368-0GB-LS: 165W
ATCA7368-0GB-CE: 180W
ATCA7368-0GB-LS-CE:
185W
ATCA7368-0GB-LSL-CE:
185W
Complete steady power consumption
including IPMC
Transition from early to steady
levels, sec 0s
Table 8-3 Power Configuration (continued)
Item Value Description
Table 8-4 Sensor Data Records
Sensor Name Sensor Type Sensor Number Detailed SDR Description
HS Carrier Hot Swap
0xF0 0x00 See Table 8-5 on page 154
HS AMC Hot Swap
0xF0 0x01 See Table 8-6 on page 155
HS RTM Hot Swap
0xF0 0x02 See Table 8-7 on page 156
-48V A Volts Voltage 0x2 0x03 See Table 8-8 on page 157
-48V B Volts Voltage 0x2 0x04 See Table 8-9 on page 158
-48V Amps Current 0x3 0x05 See Table 8-10 on page 159
Holdup Cap Volts Voltage 0x2 0x06 See Table 8-11 on page 161
Input Power Other Unitsbased
Sensor
0xb 0x07 See Table 8-12 on page 162