Altera RLDRAM II Controller MegaCore Function - Manual (Page 48)

3–4 MegaCore Version 9.1 Altera Corporation
RLDRAM II Controller MegaCore Function User Guide November 2009
RLDRAM II Controller Walkthrough
b. Type <path>\ip into the Library name box, where <path> is the
directory in which you installed the RLDRAM II controller.
c. Click Add to add the path to the Quartus II project.
d. Click OK to save the library path in the project.
7. Click Next to close this page and display the New Project Wizard:
Family & Device Settings
page.
8. On the New Project Wizard: Family & Device Settings page,
choose the target device family in the Family list.
9. The remaining pages in the New Project Wizard are optional. Click
Finish
to complete the Quartus II project.
You have finished creating your new Quartus II project.
Launch IP Toolbench
To launch IP Toolbench in the Quartus II software, follow these steps:
1. Start the MegaWizard ® Plug-In Manager by choosing MegaWizard
Plug-In Manager (Tools menu). The MegaWizard Plug-In Manager
dialog box displays.
1
Refer to Quartus II Help for more information on how to
use the MegaWizard Plug-In Manager.
2. Specify that you want to create a new custom megafunction
variation and click Next.
3. Expand the Interfaces > Memory Controllers directory, then click
RLDRAM II Controller v9.1
.
4. Select the output file type for your design; the wizard supports
VHDL and Verilog HDL.
5. The MegaWizard Plug-In Manager shows the project path that you
specified in the New Project Wizard. Append a variation name for
the MegaCore function output files <project path>\<variation name>.
1
The <variation name> must be a different name from the
project name and the top-level design entity name.
6. Click Next to launch IP Toolbench.