Ospfv3 area range configuration – Dell PowerConnect M6220 User Manual
Page 595
Configuring IPv6
593
OSPFv3 Area Range Configuration
Use the OSPFv3 Area Range Configuration
page to configure OSPFv3 area ranges.
To display the page, click IPv6 > OSPFv3 > Area Range Configuration in the tree view.
Figure 10-22. OSPFv3 Area Range Configuration
The OSPFv3 Area Range Configuration page contains the following fields:
• Area ID — Selects the area for which data is to be configured.
• IPv6 Prefix/Prefix Length — Enter the IPv6 Prefix/Prefix Length for the address range for the selected
area.
•
LSDB Type — Select the type of Link Advertisement associated with the specified area and address
range. The default type is Network Summary.
•
Advertisement — Select Enable or Disable from the drop-down menu. If you selected Enable, the
address range is advertised outside the area through a Network Summary LSA. The default is Enable.