Dell PowerConnect M6220 - Manual (Page 661)

Configuring IP Multicast 659
Configuring a Static Route
1. Open the Static Routes page.
2. Select Create Static Route in the Source field to configure a new static entry, or select one of the
existing entries.
3. Modify the remaining fields as needed.
4. Click Apply Changes.
The new or modified static route is saved, and the device is updated.
Configuring a Static Route the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• Multicast Commands
Multicast Static Routes Summary
Use the Multicast Static Routes Summary page to display static routes and their configurations.
To display the page, click IP Multicast > Multicast > Static Routes Summary in the tree view.
Figure 12-5. Multicast Static Routes Summary