Dell PowerConnect M6220 - Manual (Page 302)

300 Configuring Switching Information
Copying Mirroring to a Destination Port
1. Open the Flow Based Mirroring page.
2. Specify Policy Name and Member Class, and select the destination unit and port to be affected in
Copy to Interface.
3. Click Apply Changes.
The flow-based mirroring details are copied to the specified port, and the device is updated.
Configuring Flow-based Mirroring Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• QOS Commands
Configuring Address Tables
MAC addresses are stored in either the static or dynamic address table. Static addresses are defined by
you. Dynamic addresses are learned by the system, and are erased after a time-out. A packet addressed to
a destination stored in one of the tables is forwarded immediately to the ports. The static and dynamic
address tables can be sorted by Interface, VLAN ID, or VLAN Name. In addition, addresses can be added
to the static and dynamic address tables.
To display the Address Tables menu page, click Switching > Address Tables in the tree view. The
Address Tables menu page contains links to the following features:
• Static Address Table
• Dynamic Address Table
Static Address Table
The Static MAC Address page contains a list of static MAC addresses. A static address can be added and
removed from the Static MAC Address Table.
To display the Static MAC Address page, click Switching > Address Tables > Static Address Table in
the tree view.