Dell PowerConnect M6220 - Manual (Page 309)

Configuring Switching Information 307
Figure 7-37. GARP Timers Table
3. Use the Unit drop-down menu to view the GARP Timers Table for other units in the stack, if they
exist.
Copying GARP Timers Settings
1. Open the GARP Timers page.
2. Click Show All.
The GARP Timers Table displays.
3. Specify the Unit and Port you are copying from in Copy Parameters From.
4. Click Copy To for each Interface to receive these parameters.
5. Click Apply Changes.
The GARP Timers settings are copied, and the device is updated.
Modifying GARP Timers Settings for Multiple Ports
1. Open the GARP Timers page.
2. Click Show All.
The GARP Timers Table displays.
3. Click Edit for each Interface to modify.
4. Edit the GARP Timers fields as needed.
5. Click Apply Changes.
The GARP Timers settings are modified, and the device is updated.