Dell PowerConnect M6220 User Manual
Page 376

374
Configuring Switching Information
Figure 7-90. Add VLAN Querier
3. Enter the VLAN ID and, if desired, an optional VLAN name.
4. Complete the fields on the page as needed.
5. Click Apply Changes.
The VLAN Querier settings are modified, and the device is updated.
Displaying the MLD Snooping VLAN Querier Summary Table
1. Open the MLD Snooping VLAN Querier
page.
2. Click Show All.
The
VLAN Querier Summary Table displays.
Figure 7-91. VLAN Querier Summary Table
Configuring VLAN Querier Settings with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• IGMP Snooping Commands
This manual is related to the following products: