Dell PowerConnect M6220 - Manual (Page 327)

Configuring Switching Information 325
There are two tables in this section of the page:
• Ports — Displays and assigns VLAN membership to ports. To assign membership, click in Static for a
specific port. Each click toggles between U, T, and blank. See the following table for definitions.
• LAGs — Displays and assigns VLAN membership to LAGs. To assign membership, click in Static for a
specific LAG. Each click toggles between U, T, and blank. See the following table for definitions.
Adding New VLANs
1. Open the VLAN Membership page.
2. Click Add.
The Add VLAN page displays.
Figure 7-50. Add VLAN
3. Enter a new VLAN ID and VLAN Name.
4. Click Apply Changes.
The new VLAN is added, and the device is updated.
Table 7-1. VLAN Port Membership Definitions
Port Control Definition
T
Tagged: the interface is a member of a VLAN. All
packets forwarded by the interface are tagged.
The packets contain VLAN information.
U
Untagged: the interface is a VLAN member.
Packets forwarded by the interface are untagged.
F
Forbidden: indicates that the interface is
forbidden from becoming a member of the
VLAN.
Blank
Blank: the interface is not a VLAN member.
Packets associated with the interface are not
forwarded.