Dell PowerConnect M6220 User Manual
Page 591
Configuring IPv6
589
• Area LSA Checksum — The 32-bit unsigned sum of the link-state advertisements' LS checksums
contained in this area's link-state database. This sum excludes external (LS type 5) link-state
advertisements. The sum can be used to determine if there has been a change in a router's link state
database, and to compare the link-state database of two routers. This value is in hexadecimal.
Configuring OSPFv3 Area
1. Open the OSPFv3 Area Configuration
page.
2. Modify the fields as needed.
3. Click Apply Changes.
The configuration is saved and the device is updated.
The web page reappears with Create Stub Area and NSSA Create buttons.
Figure 10-18. OSPFv3 Area Configuration - Create Stub Area and NSSA Create
Configuring OSPFv3 Stub Area
1. Open the OSPFv3 Area Configuration
page.
2. Modify the fields as needed.
3. Click Apply Changes.
The web page reappears with
Create Stub Area and NSSA Create buttons. See Figure 10-18.
4. Click Create Stub Area.
The
Stub Area Information fields display.