Dell PowerConnect M6220 - Manual (Page 381)

Configuring Switching Information 379
Modifying the LLDP Configuration
1. Open the LLDP Configuration page.
2. Define the fields as needed.
3. Click Apply Changes.
LLDP parameters are saved to the switch.
Displaying the LLDP Interface Settings Table
1. Open the LLDP Configuration page.
2. Click Show All.
The LLDP Interface Settings Table displays.
Figure 7-95. LLDP Interface Settings Table
3. Use the Unit drop-down menu to view the LLDP Interface Settings Table for other units in the stack,
if they exist.
Copying LLDP Interface Settings
1. Open the LLDP Configuration page.
2. Click Show All.
The LLDP Interface Settings Table displays.
3. Specify the Unit and Port you are copying from in Copy Parameters From.
4. Click Copy To for each Unit/Port to receive these parameters.
5. Click Apply Changes.
The LLDP Interface settings are copied, and the device is updated.