Area range configuration – Dell PowerConnect M6220 User Manual
Page 473
Configuring Routing
471
The OSPF Stub Area Summary page displays the following fields:
• Area ID — The Area ID of the stub area.
•
Type of Service — The type of service associated with the stub metric. The switch supports Normal
only.
•
Metric Value — The metric value for the default route advertised into the area.
• Import Summary LSAs — Whether the import of Summary LASs is enabled or disabled.
Displaying OSPF Stub Area CLI Command
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• OSPF Commands
Area Range Configuration
Use the OSPF Area Range Configuration
page to configure and display an area range for a specified
NSSA.
To display the page, click Routing > OSPF > Area Range Configuration in the tree view.
Figure 9-9. OSPF Area Range Configuration