Dell PowerConnect M6220 User Manual
Page 276
274
Configuring Switching Information
Figure 7-11. Add MAC ACL
3. Enter the desired MAC ACL Name in the entry field
.
4. Click Apply Changes.
The MAC-based ACL is added, and the device is updated.
Removing a MAC-based ACL
1. Open the MAC ACL Configuration page, and select the ACL to be removed from the MAC ACL
drop-down menu.
2. Select the Remove check box.
3. Click Apply Changes.
The MAC-based ACL is removed, and the device is updated.
Displaying MAC ACLs
1. Open the MAC ACL Configuration page.
2. Click Show All.
All MAC ACLs and their related data are displayed on screen.
Figure 7-12. MAC ACL Table
Configuring MAC-based ACLs Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• ACL Commands