Dell PowerConnect M6220 User Manual
Page 441
Viewing Statistics and Remote Monitoring
439
The RMON Event Control page contains the following fields:
• Event Entry — Selects the event.
•
Community — Specifies the community to which the event belongs.
•
Description — Describes the user-defined event.
• Event Type — Selects the event type. Possible values are:
–
Log — Event type is a log entry.
–
Trap — Event type is a trap.
–
Log and Trap — Event type is both a log entry and a trap.
–
None — There is no event.
• Time — Displays the time when the event occurred.
•
Owner — Lists the switch or user that defined the event.
•
Remove — Removes the event from the Events Table when checked.
Adding an RMON Event
1. Open the RMON Event Control page.
2. Click Add.
The
Add an Event Entry page displays.
Figure 8-13. Add an Event Entry
3. Complete the fields on this page.
4. Click Apply Changes.
The event is added to the RMON Event Table, and the device is updated.