Dell PowerConnect M6220 - Manual (Page 263)

Configuring Switching Information 261
Figure 7-1. Dot1x Authentication
The Dot1x Authentication page contains the following fields:
Global Parameters
• Administrative Mode— Permits 802.1X port-based authentication on the switch. The possible field
values are:
–
Enable — Enables 802.1X authentication on the switch.
– Disable — Disables 802.1X authentication on the switch.
• Authentication Method — Selects the Authentication method used. The possible field values are:
–
Unconfigured — Indicates that an authentication method has not been selected.
– None — Indicates that no authentication method is used.
– RADIUS — Indicates that authentication occurs at the RADIUS server.