Dell PowerConnect M6220 User Manual
Page 395

Configuring Switching Information
393
Figure 7-106. Dynamic ARP Inspection Rule Configuration
The Dynamic ARP Inspection Rule Configuration page contains the following fields:
• ARP ACL Name — Select the ARP ACL for which information is to be displayed or configured.
• Sender IP Address — To create a new rule for the selected ARP ACL, enter in this field the Sender IP
Address match value for the ARP ACL.
•
Sender MAC Address — To create a new rule for the selected ARP ACL, enter in this field the Sender
MAC Address match value for the ARP ACL.
Displaying the DAI ACL Rule Summary Table
1. Open the DAI ACL Rule Configuration page.
2. Click Show All.
The
Dynamic ARP Inspection ACL Rule Summary table displays.
Figure 7-107. Dynamic ARP Inspection Rule Summary
Configuring Dynamic ARP Inspection With CLI Commands
For information about the CLI commands that perform this function, refer to the following chapter in
the
CLI Reference Guide
:
• Dynamic ARP Inspection Commands