Dell PowerConnect M6220 - Manual (Page 582)

580 Configuring IPv6
Configuring a DHCPv6 Interface Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• DHCPv6 Commands
Configuring a DHCPv6 Interface for Server Interface Mode
1. Open the DHCPv6 Interface Configuration page.
2. Specify the desired Interface, and select Server from the Interface Mode drop down menu.
The following screen appears:
Figure 10-13. DHCPv6 Interface Configuration - Server
3. Modify the fields as needed.
4. Click Apply Changes.
The DHCPv6 interface configuration is saved, and the device is updated.