Dell PowerConnect M6220 - Manual (Page 129)

Configuring System Information 127
Removing Log Information
1. Open the Log File Table page.
2. Click Clear Log.
The log information is removed from the log file table, and the device is updated.
Removing Log Information Using the CLI
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• Syslog Commands.
Remote Log Server Settings
Use the Remote Log Server Settings page to view the available log servers, to define new log servers, and
to set the severity of the log events sent to the server.
To display the Remote Log Server Settings page, click System > Logs > Remote Log Server.
Figure 6-19. Remote Log Server Settings
The Remote Log Server Settings page contains the following fields:
• Log Server — Server to which logs can be sent.