Dell PowerConnect M6220 - Manual (Page 132)

130 Configuring System Information
Working with Remote Server Logs Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• Syslog Commands.
Setting the Operational Mode
Users with a privilege level of 15 can configure the switch to operate in normal mode or simple mode. By
default, the switch operates in normal mode. When the PowerConnect M6220/M6348/M8024 is
operating in simple mode, a limited number of features are available to configure. For features that are
not supported in simple mode, their administrative Web pages and CLI commands are hidden.
The following list shows the features that are available in Simple mode. Some configuration options with
the listed features might not be available.
• Management Security (No Telnet Server or Denial of Service)
• File Management
• Port Status and Statistics (Ethernet ports only)
• Port Channel Status
• Dot1x
• SNMP
• SSH
• General System Information (Read-Only)
• HTTP Server
• Port Aggregator (Available only in Simple mode)
To display the Operational Mode menu page, click System > Operational Mode in the tree view. Use
this page to go to the Operational Mode Configuration page.
Operational Mode Configuration
Use the Operational Mode Configuration page to enable Simple mode or return the switch to normal
mode. Only users with the highest privilege level can change the operating mode.
To display the Operational Mode Configuration page, click System > Operational Mode >
Operational Mode Configuration in the tree view.