Snmp global parameters – Dell PowerConnect M6220 User Manual
Page 210

208
Configuring System Information
• Traps
Authentication or Privacy Keys are modified in the SNMPv3 User Security Model (USM).
Use the SNMP page to define SNMP parameters. To display the SNMP page, click System > SNMP in
the tree view.
SNMP Global Parameters
Use the Global Parameters
page
to enable SNMP and Authentication notifications.
To display the Global Parameters
page, click System > SNMP > Global Parameters in the tree view
.
Figure 6-89. Global Parameters
The Global Parameters page contains the following parameters:
• Local Engine ID (6
–
32 hexadecimal characters) — Sets local SNMP engine ID.
• Use Default — Configures the device to use the default SNMP EngineID.
•
SNMP Traps — Enables or disables the device sending SNMP notifications.
•
Authentication Trap — Enables or disables the device sending SNMP traps when authentication fails.
Setting Local SNMP Engine ID
1. Open the Global Parameters
page
.