HITEC Flash 7 - Manual (Page 96)

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 6: Heli Programming Menu
95
Pitch Curve cont.
11. Press the back button to return to the model function menu.
To disable the pitch curve:
1. Scroll to highlight the “MIX” field in the pitch curve menu and
press the jog dial to activate the menu.
2. Select “INH” (inhibit) and press the jog dial to confirm your
selection.
3. Press the Back button to return to the model function menu.
You may also select a flight condition in this menu by activating the desired flight condition.
Note
Tip Tip
Tip Caution
Swash Ring
The Swash Ring Mix limits the travel of the servos attached to the helicopter swash plate. This can be used
to help prevent binding of the control system when using large control movements for aerobatics. There
are no adjustments to the swash ring mix.
1. From the model menu, rotate the jog dial to highlight “Swash
Ring” and press the jog dial once to enter the activation menu.
2. Press the jog dial again to activate the menu.
3. Rotate the jog dial to select ACT (activate), then press the jog
dial to confirm your selection and activate the Swash Ring mix.
4.Press the back button to return to the model function menu.