HITEC Flash 7 - Manual (Page 19)

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 1: Introduction 18
Optima and Minima Series Receiver Link (ID-Setting or Bind) cont.
When the binding process is completed, it
automatically goes to the finish screen. (The
BLUE and RED LEDs will be solidly on)
When the LED stops blinking, press the jog
dial to get to the next screen. The blue LED
will glow solid.
Turn the power to the receiver off, then back on. Check for a solid blue LED light. Once on, press the jog dial
to FINISH the binding process. Make sure all functions are working properly before flying your model.
If any function is not working as described, please go back to step 6 and repeat the
binding again.
If all functions work well, press the Finish icon on the screen to finish binding.